NASA is debating the launch of Artemis 1 due to technical issues

NASA’s Artemis 1 launch was scrapped on Monday. Fuel leaks have forced NASA to ditch its new moon rocket on an unmanned test flight. Now, NASA engineers must determine how much tuning the engine needs. Is this something that can be paddled, or does it have to come back to VAB? NASA provided an update Monday afternoon after the scrub was completed. “It’s not going to fly until it’s ready. There are millions of components to this rocket. And the complexity of its systems and bringing it all to a countdown center is daunting,” NASA Administrator Bill Nelson said during the update. “Scrubs Understand that this is part of the plan,” Nelson said. .Artemis 1 Mission Manager Mike Sarafin says that Artemis 1 has been inspecting the launch pad after lightning struck the towers on Saturday. After evaluation, it was concluded that there was no problem with the rocket. On Monday, Sarafin said, the committee had to resolve a matter. Software problem “The team ran into a problem validating the Orion software,” Sarafin said. It was resolved once it was identified as a misconfiguration related to the control module not being activated. Tanking continued to be delayed by an hour. A lightning alert was issued at the Kennedy Space Center. Then, according to Saraf, a hydrogen leak led to the loading delay. The team quickly cooled the interface and worked through the hydrogen leak. Sarafin discussed problems with an engine that the NASA team encountered Monday morning. According to NASA, the engineering team repaired an Engine 3 bleed in the center stage and the countdown was on. “We ran into a problem cooling engine #3. The engine needs to be at cryogenically cold temperatures so that when it starts, it won’t be shocked by all the cold fuel flowing through it,” Sarafin said. The issue of an additional vent valve in the inner tank caused NASA to scavenge. There were weather conditions. It was a hurdle the team had to overcome. He says rain and lightning can make travel prohibitive. Sarafin said the Friday release window is running, but the team will need time to look at the data. NASA administrators Traitor Bill Nelson said of the launch: “We’re not going to launch until it’s fixed. Actually, they have a problem with the gases going into the engine bleed in one of the engines. You can’t go, there are some guidelines,” Nelson said. The next missile attempt won’t take place until Friday at the earliest. The release window on Friday opens at 12:48 PM and remains open until 2:48 PM. It is expected to arrive early Monday morning and take off from Launch Pad 39-B. The launch window opened at 8:33 a.m. and was supposed to remain open until 10:33 p.m. Technical issues forced the launch to be scrapped minutes after the window opened. Related: Artemis 1: Everything you need to know for launch day Previous coverage Below: Hundreds of thousands of people will catch a great view of Brevard County They visit in the hope that Anywhere from 100,000 to 500,000 people are expected to land on the Space Coast. Monday’s introduction is a school holiday.” Be patient. Watch out for pedestrians, because a lot of people are going to be crossing the streets,” said Dan Walker with Brevard County Emergency Management Response. the size of Brevard County on a Monday morning,” Walker said. RELATED: Meet the mannequins headed for the moon on Artemis I, the rocket that will launch without astronauts and circle the moon before returning to Earth. Rather than astronauts, a mannequin named Commander Mooney’s Combos Orion Piloting the spacecraft, two mannequin torsos called Helga and Zohar go along for the ride. The Artemis project aims to land the first woman and first man on the Moon and eventually send astronauts to Mars. The new Space Launch System rocket, the Orion spacecraft, and several other components designed to make deep space travel safer for humans. ecraft for testing Artemis 2, slated for launch in 2024. See more Artemis 1 coverage below: Related: Fuel leak interrupts NASA’s Artemis I launch countdown lies Here’s what you need to know. RELATED: Launch at Kennedy Space Center Related: UCF students, researchers involved in Artemis program RELATED: Artemis 1 mission ‘critical step’ back to moon RELATED: Vice President Kamala Harris heads to Florida for Artemis 1 launch RELATED: ‘Time to get down to business’: Final Cap Preparations underway for Artemis 1 launch from Canaveral Related: Artemis launch could help NASA gain early lead in moon race with China

See also  Pac-12 expansion candidates: Where should the conference look first without USC and UCLA?

NASA’s Artemis 1 launch was scrubbed Monday.

Fuel leaks forced NASA to scrap launching its new moon rocket on an unmanned test flight.

Now, NASA engineers must determine how much revision the engine needs. Is it something that can be paddled or does it have to come back to VAB?

NASA provided an update Monday afternoon after the scrub.

“It’s not going to fly until it’s ready. There are millions of components to this rocket and its systems, and the complexity is daunting when you bring it to a countdown center,” said NASA Administrator Bill Nelson. Upgrade.

“Understand that scrubs are part of this plan,” Nelson said.

Mike Sarafin, Artemis 1 mission manager, says when an analysis Artemis 1 struck the lightning towers on the launch pad Saturday.

After evaluation, it was concluded that there was no problem with the rocket.

On Monday, Sarafin said the team had to resolve the software issue.

“The team ran into trouble validating the Orion software,” Sarafin said.

It was resolved once it was found to be a misconfiguration related to the control module not being activated.

Tanking was delayed by an hour following a lightning warning at Kennedy Space Center.

Then, according to Sarafin, a hydrogen leak led to a loading delay. The team quickly cooled the interface and worked through the hydrogen leak.

Sarafin discussed problems with an engine the NASA team encountered Monday morning.

According to NASA, the Engine 3 bleeding engineering team was repairing the main stage and the countdown was underway.

See also  Live announcements of primary elections: California News and more

“We ran into a problem with cooling engine #3. The engine needs to be at cryogenically cold temperatures so that when it starts, it won’t be shocked by all the cold fuel flowing through it,” Sarafin said.

An additional vent valve problem in the inner tank forced NASA to abort the launch.

“The technical challenges we encountered with the engine bleed and the vent valve are things we need to look at,” Sarafin said.

Sarafin also says the weather conditions were a hurdle for the team to overcome.

He says rain and lightning will hamper the work.

Sarafin said the Friday release window is running, but the team will need time to look at the data.

NASA Administrator Bill Nelson said:

“We’re not going to launch until it’s fixed. In fact, they have a problem with gases going into the engine bleed on one engine. You can’t go, there are some guidelines,” Nelson said.

The next launch attempt won’t take place until Friday at the earliest. The Friday release window opens at 12:48 PM and remains open until 2:48 PM

The launch was expected to arrive early Monday morning and take off from Launch Pad 39-B.

The launch window opened at 8:33 am and was supposed to remain open until 10:33 am, when the launch was scrubbed minutes after the window opened due to technical issues.

Related: Artemis 1: Everything you need to know ahead of launch day

Previous coverage below:

Hundreds of thousands of people visit Brevard County.

Between 100,000 and 500,000 people are expected to descend on the Space Coast to watch Monday’s launch.

See also  Data from the Hubble Telescope suggests that something "strange" is happening in the universe

For a full list of the best places in Central Florida, you can find the historical publication, Click here.

Brevard County officials are bracing for heavy traffic on release day, advising parents to plan ahead to drop off their children at school.

“Be patient. Watch out for pedestrians because a lot of people are going to be crossing the streets,” said Dan Walker with Brevard County Emergency Management Response.

“We’ve heard up to 500,000 from the Cape. So you’re talking about almost doubling the size of Brevard County on a Monday morning,” Walker said.

Related: Meet the mannequins going to the moon on Artemis I

The rocket will be launched without astronauts and will circle the moon before returning to Earth.

Instead of astronauts, a mannequin named Commander Moonkin Combos will lead the Orion spacecraft, with two mannequin torsos called Helga and Zohar along for the ride.

The Artemis program aims to land the first woman and first person of color on the Moon and eventually deliver astronauts to Mars.

The inaugural mission will test the new Space Launch System rocket, the Orion spacecraft, and several other components designed to make deep space travel safer for humans.

The mission will help ensure things go smoothly for the Orion spacecraft for Artemis 2, expected in 2024.

The weather is favorable for launching.

Find more Artemis 1 coverage below:

Related: A fuel leak interrupts NASA’s Artemis I launch countdown. Here’s what you need to know

Related: 100,000 spectators expected for Artemis 1 launch at Kennedy Space Center

Related: UCF students are researchers involved in the Artemis project

Related: Artemis 1 test mission ‘critical step’ in response to moon

Related: Vice President Kamala Harris travels to Florida for the Artemis 1 launch

Related: ‘Time to get down to business’: Final preparations underway for Artemis 1 launch from Cape Canaveral

Related: The Artemis launch will give NASA an early lead in the moon race with China

Leave a Reply

Your email address will not be published.